Radio/Stereo Removal and Installation Guide for Ford F 150

This document contains step-by-step radio procedures stereo complete with an illustration. This step-like with the 1999 Ford 150′s and Expeditions except for a small difference in the design of the kit radio installation required to mount a radio replacement. Either material can be used to install a new radio in the car, but be aware of the difference in the radio installation kit needed to install the new radio. Tools required for this installation: Ford keys or hanger, welding / crimper, voltmeter, small battery. Remove Factory Radio: the dash plastic surrounding the radio must be removed. This dashboard unsnaps by simple traction. Using your hands, grab a corner and pull until the dashboard plastic derived entirely from the main body of the dashboard. The Ford radio is snapped into dashboard of the vehicle. With the proper tool, known as radio buttons removal Ford. Pull the radio from the dashboard. Unplug the antenna cable to the back of the radio. Disconnect the plastic connector wiring harness behind the radio. (Some expeditions / browsers may have an amplifier in the Ford vehicle. This is the stage, you’ll be able to tell). Removing Ford Radios Using “U” shaped key removal, the new radio wiring, installation of radio, Completing the radio installation.