Step by step Intake system installation instruction for 07-09 Toyota Camry/09 Venza V6-3.5L, tools needed: Flat Blade Screwdriver,
Phillips Screwdriver, Ratchet, Extension, 10mm Socket, Pliers, 10mm Wrench, 8mm wrench, 3mm Allen Wrench. Step by step guide: Turn the ignition OFF and disconnect the vehicle’s negative battery cable. Disconnect the mass sensor electrical connection
by depressing the center tab and gently pulling the harness away from the mass air sensor. Release the two wiring harness clips from the air box lid. Gently pull the engine cover upward to release it from the mounting grommets. Once released, Remove
engine cover from the vehicle and set aside. Disconnect the vacuum line from the intake manifold plenum connection. Disconnect the vacuum line from the upper air box lid. Disconnect the intake tube plenum vacuum line. Disconnect the two vacuum lines from the “Vacuum switching valve.” Disconnect the two vacuum lines from the factory “T” fi tting. Remove the screw securing the “Vacuum switching valve” to the stock fresh air duct. Place the “Vacuum switching valve” in a position that will allow ample clearance to work around. Remove the air fi lter. Remove the three bolts that secure the lower air box to the mounting bracket. This installation guide consist of 34 steps with pictures. Available to download in pdf format.

Category : Automotive, Toyota
Source : http://www.knfilters.com
Language : English
View : 473 views
Size : -
Date : November 23rd, 2009

(No Ratings Yet)

 Loading ...