To install Volkswagen LED Taillight
First: Open the trunk
Second: Remove the negative cable from the battery using the 10mm wrench.
Third: Get to work
Remove the Drivers side taillight. To get at it you have to remove the panel on the drivers side that holds the first aid kit. Most US cars do not have the kit so it’s just empty inside. You will see a cutout in the
trunk liner, give it a tug and you will have access to the rear of the taillight. It will look something like this.
Remove ONLY the connector with the 4 large wires.
You remove the connector by pulling back on the green tab and pulling the connector out. Some pliers used gently
helps on this. You can see the upper 10mm nut in this photo
Using the 10mm ratchet and socket remove the upper and lower 10mm nuts.
Since the cargo area is well lined and full of places for things to hide, keep your fingers on the
nut as you back it off so it does not fall out of thesocket and get lost.

Category : Automotive, VW
Source : http://homepage.mac.com
Language : English
View : 525 views
Size : 2,4 MB
Date : March 12th, 2010

(No Ratings Yet)

 Loading ...