TECHNICAL INFORMATION Spark Output: The Enhancer Ignition System for Honda 400EX produces a high output spark that approximately two times the stock spark output. This spark energy allows increased use of richer fuel mixtures or even exotic fuel such as alcohol. The MSD Ignition will put about 30,000 volts to the spark plugs. See REMOVAL factory service manual for proper removal. Note: Do not mix the factory Honda Coil and CDI unit with CDT components as damage can occur. With MSD Enhancer, recommended for use as a cold spark plug while the engine is still able to easily. Gap spark plugs will be very dependent on the compression machine. PROGRAMMING One of the many advanced features of the Enhancer Ignition System is the ability to program different time options into the combustion system. This is especially important when making any engine modifications or special fuel to run. Default Position: 1 Max Bank Transfer Timing +5 ° BTDC S1 = ON, S2 = OFF, S3 = ON. With the ignition installed, connect the two cables used and their route along the frame on the tracks on the left side. Black and Red Route cables to the battery terminals. THEY DO NOT CONNECT TO THE BATTERY AT THIS TIME

Category : Automotive, Honda
Source : http://www.msdpowersports.com
Language : English
View : 264 views
Size : -
Date : November 22nd, 2009

(No Ratings Yet)

 Loading ...