VERY IMPORTANT! Remove negative battery cable. If you have a coded alarm on your radio, retrieve the code before removing the negative cable.
Put your car on jack stands. Never work under a car that is not supported by jackstands or ramps.
REMOVAL OF STOCK PARTS
1. Remove the “IVTEC” plastic cover. Unplug the Air Temperature (T/A) sensor harness from
the T/A sensor on the intake rubber hose. The wire colors are green with a yellow stripe and
red with a yellow stripe.
2. Remove the large diameter rubber hose between the air box and throttle body. Loosen
the clamp at the throttle body with a Phillips head screwdriver or 10mm socket and slide
the hose off of the throttle body.
3. Disconnect the valve cover vent hose from the airbox. Remove the smaller hose that runs
from the Thermal valve, near the head, to the rubber intake hose. This is your Intake Air
Bypass Control or “Air Injection” supply hose. It will be reconnected to the rubber intake
hose once the supercharger installation is nearer completion.

Category : Automotive, Honda
Source : http://www.supercharger.com
Language : english
View : 743 views
Size : 2 mb
Date : March 27th, 2010

(No Ratings Yet)

 Loading ...