EXTENSION HOUSING OIL SEAL
ON–VEHICLE REPAIR
1. REMOVE DRAIN PLUG AND DRAIN ATF
2. REMOVE FRONT EXHAUST PIPE AND HEAT INSULATOR
(See page EM–94)
3. REMOVE PROPELLER SHAFT (See page PR–5)
4. REMOVE TRANSMISSION OUTPUT FLANGE
(a) Using a chisel and hammer, loosen the staked part of the
nut.
HINT:
Shift the shift lever to the P position.
(b) Remove the nut.
(c) Tap the output flange with a plastic hammer to remove it
and 2 washers.
(d) Using a screwdriver, remove the oil seal from the output
flange.
5. REMOVE EXTENSION HOUSING REAR OIL SEAL
Using SST, remove the oil seal.
SST 09308–00010
6. INSTALL EXTENSION HOUSING REAR OIL SEAL
(a) Coat the lip of a new oil seal with MP grease.

Category : Automotive, Toyota
Source : http://www.supralife.ru
Language : English
View : 1,534 views
Size : 400 kb
Date : March 24th, 2010

(No Ratings Yet)

 Loading ...